Shopping for a Router Sucks. Here’s What You Need to Know

Internet service providers (ISPs) connect your home to the internet, and they usually send you a modem and router (sometimes in a single device). The modem connects your home to the broader internet, the router hooks up to the modem, and you connect all your gadgets—with wires or wirelessly—to the router to access that connectivity. ISPs often charge you a rental fee for this equipment, and their routers are usually basic in terms of performance and features. The good news is that ISPs are by law no longer allowed to force you to use their equipment or charge you to use , though you may still have to return their stuff to avoid charges.

We’re largely looking at using your own router in this guide and using your ISP’s modem. By using your own, you can potentially save money in the long term, but you can also enjoy faster Wi-Fi, better coverage, easier configuration, and extra features like parental controls and guest Wi-Fi networks. We will run through your router options, but whatever system you decide to go with, check compatibility with your ISP before buying. You can also search your ISP’s forums to find posts where people discuss using different routers and modems. A little research before you shop can save you a big headache down the line.

There are various ways to make your Wi-Fi faster, and buying a new router is one of the most obvious. To help you decide on the type of router to go for, calculate the rough square footage of your home before you begin.

Single Router

The simplest solution for most people is to choose a single router or a router and modem combo. Bear in mind that this device will have to plug into your existing socket or modem via Ethernet cable, which restricts where you can place it. The Wi-Fi signal will be strongest near the router and will gradually drop off and slow down the further away you get. If you’re able to, place your router centrally in your home and leave it out in the open.

Routers should always state square footage for coverage, but certain types of construction—thick walls, insulation, and other devices—can interfere with Wi-Fi signals, so don’t expect to enjoy full-speed Wi-Fi at longer distances. Powerful routers with wide coverage are often large devices with multiple external antennas, but they’re usually very expensive.

Mesh Systems

If you have a large home and want solid coverage in your garden, or you have thick walls and specific dead spots with your current setup, then mesh Wi-Fi could be the answer. Mesh systems consist of a central hub, which connects just like a single router, as well as additional satellites or nodes you can place around the home.

Devices connect to the internet through the nearest node, so you can achieve wider Wi-Fi coverage and a more reliable connection in different areas by adding a node. Just bear in mind that each node will need a power outlet. Mesh systems are typically more expensive than single-router setups (though not always), but they enhance coverage and reliability, and they often boast additional features and control options. They also tend to be smaller than regular routers and are typically designed to blend in with your decor.

Most mesh systems are expandable, and some manufacturers allow you to link individual routers to create a mesh, so you can start with a single router and add more as required. Just make sure you understand which devices are compatible. For example, any Asus router that supports AiMesh can work as part of a mesh system, but TP-Link’s OneMesh technology only allows you to add compatible Wi-Fi extenders—you can’t link routers together.

Alternatives to a New Router

If your issue is more about coverage and you have a single problem room where you want to improve Wi-Fi, or a particular device that needs a faster connection, you might not need to buy a new router. Try one of these alternatives. They each have their own technical challenges and potential issues. Even when successfully deployed, they won’t come close to matching the convenience of a good mesh system, but they are all much cheaper.

Ethernet Cables

Before Wi-Fi was ubiquitous, we relied on Ethernet cables to connect computers and other devices to routers. Ethernet connections are much faster, more stable, and more secure than Wi-Fi (or any other option we suggest here). The drawback is that the device you want to connect needs to have an Ethernet port, and you have to run cable from your router to the device. If you need to run Ethernet cables to multiple spots, use an Ethernet switch. With a switch you can plug one cable in from your router and run several cables out to various devices. Anyone looking to get the best performance from a mesh system should also consider running Ethernet cables between the main router and nodes to create a wired backhaul that leaves the Wi-Fi bands free for your devices to connect to. 

Power Line Adapters

Sold in pairs, power line adapters pass an internet signal through your electrical wiring. You plug one into a power outlet near your router and connect it with an Ethernet cable, while the other power line adapter plugs into a power outlet in the room where you want faster internet. They can be a good solution if you have a console or smart TV in your living room at the back of the house, but your router is in the front hall, for example. Unfortunately, effectiveness depends heavily on your electrical wiring.

MoCA (Multimedia over Coax Alliance)

If your home already has coaxial cables installed (perhaps for cable TV), you can use them to create a reliable wired network that offers high speeds and low latency compared to Wi-Fi. You can buy routers, network adapters, or Wi-Fi extenders that support the MoCA standard. Much like power line adapters, this can be a great way to pass an internet signal to a smart TV, game console, or desktop that doesn’t get a strong Wi-Fi signal.

Wi-Fi Repeaters

You can use Wi-Fi repeaters to spread the Wi-Fi from a single router a bit further and potentially boost the signal in a dead spot. These devices are a good solution for some people, but they can be inefficient, prone to interference, and often create a secondary network with a different name from your regular Wi-Fi.

Access Points

If you don’t mind a challenge and have a spare old router lying around, you can look into configuring it as an access point or using it as a Wi-Fi extender. This can be particularly effective if you’re able to connect it to your main router via cabling, but configuration can prove tricky.